Aim ANET1553 Series, User Manual

Page: 59 / 72

8. Technical Data
ANET1553-x
User’s Manual
49
Trigger In:
TTL compatible Input Level, 1KΩ series resistor and fast ESD
protection. Rising Edge sensitive, required pulse width > 75 ns
Trigger Out:
Output with TTL Level, series resistor of 82Ω and fast ESD
protection.
Output-Strobe pulse width: 500ns
Discrete IO : User definable Input/Output selection done by software,
Input High voltage 3.0V
… 35.0V.
Input Low voltage max. 0.8V
Output High voltage:
Internally driven: min. 4V default,
Externally supplied: up to 35V max
Output Low voltage: 0.4V max
Maximum Sink Current of each open collector: 50 mA
Please note: When the default 5V for the discrete outputs are not
used, provide a serial resistor in line with the open collector
transistor. If using a discrete pin as input, make sure that the
output mode is set to default before connecting an external
voltage. Otherwise the transistor can be damaged.
Voltage Supply: Input Voltage Range
- V
IN
: 9V
DC
…15V
DC
(12V
DC
recommended)
Power Consumption
- Stand by:
P
IN
= ≤100mW
- Operational (IDLE):
P
IN
= ~2,8W
- Operational (1 channel 100% Bus Load)
P
IN
= ~4,5W
- Operational (2 channels 100% Bus Load)
P
IN
= ~6,1W
Note:
All measurements are done with a V
IN
=12V.
Temperature: Standard Temperature Range:
0°C…50°C
Extended Temperature Range: -
15°C…60°C
Storage Temperature Range: -
40°C…+85°C
Humanity:
0…95% non-condensing
Dimensions: Width x Length x High = 120 x 160 x 26mm
(without connectors)
Weight: ~550g