AHT HTK-500ST/AL, Installer Manual

Page: 10 / 34

10
INSTALLATION INSTRUCTIONS
Installing the platform
- Remove mounting device
- Press the “UP”-Button to energize the hydraulic system until the pins for the mounting
devices moves slightly.
- Remove pins between mounting device and lift arm.
- Remove screw clamps and mounting devices.
- Installing the platform
- Press the “DOWN”-Button and push
the hoisting unit manually downward
in one time, to lower the hoisting
unit approximately 40cm.
- Position the platform
- Remove the joint plate (on both sides)
“DOWN”-Button
1) Remove pin between lever arm and
joint plate
2) Remove the joint plate
pin: lever arm - joint plate
joint plate
lever arm