INSTALLATION INSTRUCTIONS
How to adjust the platform level
- Lower the platform to ground level. (Do not tilt the platform to ground)
- Loosen the locking nut.
(on both sides)
- Turn the adjusting screw clockwise for
lower the platform tip
(on both sides)
- Turn the adjusting screw anti clockwise for
raise the platform tip
(on both sides)
- Check the correct adjustement of the adjusting screws
On lower position, the both adjusting screws must have contact with the joint plate.
OK
WRONG
- If the platform level is correct, fasten the locking nut. (on both sides)
Adjusting
screw M16
Locking nut
Joint plate
contact
contact
contact
no contact
15
Summary of Contents for HTK-500ST/AL
