AHT HTK-500ST/AL, Installer Manual

Page: 5 / 34

INSTALLATION INSTRUCTIONS
Installing the Mounting Device
- Fixing the mounting device
Center the mounting device on
the truck body floor.
Both mounting devices must
make a contact with the truck
floor end. Clamp both mounting
devices on the truck body floor.
- Platform Preparation
Before you can install the main frame you have to remove the 2 pins, the spring and the
tube from the platform.
1) Remove the pin from platform bearing on both sides.
2) Remove the spring on the right side.
Remove the tube on the left side.
5