AHT HTK-500ST/AL, Installer Manual

Page: 8 / 34

8
INSTALLATION INSTRUCTIONS
Energize the power pack
CAUTION: REMOVE TRANSPORT FILLER CAP AND INSERT DIPSTICK:
(There is no air hole in filler cap and the pump or reservoir will be destroyed)
Be sure the vehicle and the liftgate are of the same current (12V or 24V).
Fuse is in the power pack. (12V = 25 Amp and 24V = 16 Amp).
Connect the
positive cable, directly from the battery, to the starter solenoid. (min. 16mm²)
Connect the negative cable, directly from the battery, to the motor ground. (min. 16mm²)
Complete all other electrical work. (Connect all control switches)
CAUTION: REMOVE TRANSPORT FILLER CAP AND INSERT DIPSTICK:
(There is no air hole in transport filler cap and the pump or reservoir will be destroyed)
- Build in between Battery (+) and (+)-Cable the Main Fuse
MAIN FUSE
12V = 125 Ampere
24V = 80 Ampere
to Power
Pack
FUSE BOX