AHT HTK-500ST/AL, Installer Manual

Page: 2 / 34

SERVICE QUALIFICATIONS TO INSTALL
THE TAILGATE LOADER
The installer should be well trained in the proper procedure for installing the AHT before
beginning the installation.
Carefully read the manual before starting to install the AHT tailgate loader.
Only mature adults, age 18 and above, should install the AHT tailgate loader.
Installer should be well qualified for installing hydraulic equipment.
Installer should be well qualified for installing the electrical equipment.
INSTALLATION GUIDELINES
1) Remove bumpers, lights, tool box etc. from rear of vehicle if necessary.
2) Cut and shape the body and chassis to fit the tailgate.
3) Fixing the mounting device on the truck body.
4) Remove the pin from platform bearing
5) Position the mainframe under the truck. Then displace the power pack.
6) Fix the mounting brackets onto the truck main frame.
7) Mount the power pack again.
8) Energize the power pack.
9) Remove the mounting devices and lower the hoisting unit for approximately 40cm.
10) Position the platform and install the joint plate, the spring, the tube and the pin at the
platform bearing.
11) Lift up the lever arm and the closing cylinder and install the pins for lever arm - joint plate
12) Remove the tilting Lock.
13) Adjust the platform level.
14) Installing the platform lock.
2