Infrarot-Stumpfschweißmaschine
Typ
agru SP 315-S
Nr.
31506011
Netz 230V
IP54
50/60Hz 1700W
Hersteller
agru Kunststofftechnik
Ing.-Pesendorfer-Str.
31
A - 4540 Bad Hall
CE
Tel. +43 7258 7900
Version April 2008
EN
7
agru SP 315-S User’s Manual
Info
User’s Manual
The User’s Manual has to be available at any time on the site
where the machine is used. If the User’s Manual should come
to be incomplete or illegible replace it without delay. Feel free
to contact us for assistance.
2.4
Welder and Operator Obligations
s
4HEMACHINEMAYBEOPERATEDEXCLUSIVELYBYPERSONSWHOAREFAMIL
-
iar with the applicable regulations, the guidelines for the prevention
of accidents, and the User’s Manual.
s
4HEMACHINEMAYBEOPERATEDONLYWHENOBSERVED7ELDERSMUST
have been introduced properly to operating the machine or must
have participated in a dedicated training. The operating/owning
company engages to check at reasonable intervals if the machine
is operated by the welders with the intended use and under proper
guidelines of safe work.
s
4HEMACHINEMUSTNEVERBEOPERATEDIFNOTINPROPERSTATEOFREPAIR
Before welding, the welder is required to make sure that the state
of the machine is in order.
Important
During transport, the support console of the heating element
and facing tool has to be secured with the transport locks at all
times. When installing the machine, remove the transport locks
before applying power to the machine.
2.5 Warranty
Warranty claims may be raised only if the conditions for warranty given
in the General Terms and Conditions of Sale and Shipment obtain. Fur-
thermore, the provisions and instructions contained in the User’s Manual
have to have been respected.
2.6
Transport and Storage
During transport, the machine must be at all times in the transport box
it is shipped in. Ensure that the console with heating element and facing
tool is locked during transport.
The transport box should also be used to store the machine. The machine
has to be stored in a dry location, be clean or has to be cleaned, and be
locked against unwanted operation.
2.7
Identifying the Machine
Each machine is identified by a name plate. It shows the machine model
(“Typ”), the serial number (“Nr.”), and the manufacturer.
3
Product Description and Principles of Operation
3.1 Intended
Use
The agru SP 315-S Welding Machine is designed exclusively for weld-
ing plastic pipes and fittings using the infrared welding technique (butt
welding without contact).
Only the welding parameters shown on the touchscreen display (prepro-
grammed by the manufacturer or defined by the user) can be selected
for a welding operation. Any modification of the welding parameters
contained in the control software is strictly prohibited.
It is also part of the intended use to conform to the instructions provided
in the User’s Manual.
Summary of Contents for SP 315-S
Page 2: ......
