42
require replacement.
Hose becoming detached from the end fitting.
Corroded end fitting leading to reduced solidity and function.
Non compliance with mounting specifications.
Exceeding the 6-year usage period. The following information is essential: the date of
manufacture of the hydraulic hose marked on the end fitting, to which you must add 6 years. If
the date of manufacture indicated on the connector is "2004" the usage period will end in
February 2010. See the "Marking of hydraulic hoses" section for further information.
Fitting and removing hydraulic hoses
When fitting and removing hydraulic hoses, the following instructions must be strictly adhered to:
Only use genuine AGRISEM hydraulic hoses.
Pay particular attention to cleanliness.
You should always fit hydraulic hoses so that in all operating conditions,
They are not subject to traction, apart from that caused by their own weight.
No short lengths are flattened.
There are no external mechanical actions on the hydraulic hoses.
Avoid hoses rubbing against parts of the machine or against each other by arranging
and attaching them correctly. Protect hydraulic hoses with protective sheaths if
necessary. Cover parts with sharp edges.
The authorised bending radius are not exceeded.
If hydraulic hoses are connected to moving parts, measure the length of the hose to ensure
that the total range of movement is not less than the smallest authorised bending radius
and/or that the hose is not subject to traction.
Attach hydraulic hoses at the places intended for this purpose. In this respect, avoid supports
that may hinder the natural movement of the hose and modifications to the length.
Hydraulic hoses must not be painted.
Wear ring maintenance
:
Some joints on AGRISEM tools have wear rings. These must be changed as soon at the first sign of
lateral clearance.
Tyre maintenance
:
The tyres must always be inflated to a pressure adapted to their use. It may be necessary to adapt the
pressure between the road and the field. The average pressure of all Flexi-Pack tyres is 2.5 bars.
Summary of Contents for DS1100
