Agrisem DS1100, User Manual

Page: 22 / 49

22
Wear appropriate personal protective equipment for the work to be performed. In particular,
wear safety shoes and gloves to handle sharp parts.
Take all the necessary precautions when fitting working parts that are both heavy and sharp.
The machine must only be serviced and repaired by competent persons who are familiar with the
features and mode of use of the machine.
The machine must only be repaired with genuine AGRISEM International spare parts.
For bare metal parts, use either an anti-rust product leaving a greasy film or thick grease.
According to the type of machine: before carrying out any work on the electrical circuit or before any
welding operations, disconnect the wiring harnesses coming from the tractor. Disconnect the battery
cables and alternator cables.
Do not weld or use blow torches near pressurised fluids or inflammable products.
2.3.1.6. Instructions regarding installation
The machine can be fitted with electronic components and elements which can be affected by
electromagnetic emissions from other devices. This type of influence may be a source of danger for
people if the following safety instructions are not followed:

If devices and/or electrical components are installed and connected to the
dashboard electrical circuit at a later date, the user must first check that the
installation will not disturb the vehicle's electronics or other components.

Ensure that electric and electronic components subsequently installed comply
with directive 2004/108/CEE regarding electromagnetic compatibility in its
current version and that they have CE marking.
Before carrying out any operations on the electrical installation, disconnect the battery's negative
terminal.
Only use the recommended fuses. Using fuses which have too high an amperage may damage the
electrical installation with a risk of fire.
Ensure the battery terminals are correctly connected, starting with the positive terminal and then the
negative terminal. When disconnecting the terminals, start with the negative terminal and then
disconnect the positive terminal.
Systematically fit the cover provided for this purpose on the positive terminal on the battery. Be careful
of the risk of explosion when earthing.
Risk of explosion: avoid sparks and naked flames near the battery.