Agriculex Inc.
Tel: 519 837 0871 Fax 519 837 4291 www.agriculex.guelph.org
1-59 suburban Ave Guelph Ontario N1E 6B4
12
Click on the
‘Done’
button. Then click on the
‘Start’
button. The counter will start
counting.
NB: In the
‘Batch Count Mode’
you can click on the
‘Done’
button to end the Batch
Count at any time when there are not enough seeds in the hopper or should you wish to
quit counting.
3.7
Dump Seed and Sample Ready Dialog
You can select the setting of the
‘auto-dump’
seed or
‘manual dump’
seed
as batch count
has been completed. The default setting is auto-dump. Under this mode the residual seed
in the hopper will be dumped out as the counter finishes the batch count. In the manual
dumping mode you will have a chance to repeat the previous batch count before you click
the
‘Dump’
button to dump out the residual seed in the hopper.
You have also the option to set-up the
‘sample ready dialog’
appearance should you wish
to do so. The default setting
is a dialog frame will pop up as the sample is ready for
loading.
Figure 3.7
3.8
Add Seed Parameters
You can add the seed name and associated parameters into this program for future use.
Click Option menu to select
‘Edit Seed Para’
. See above Figure 3.8
Click
Edit Seed Para
, Edit Seed Dialog will pop up as figure 3.8 shown below
