agria
Power Mower 5400
43
5. Maintenance
Machine
Gearbox
Check transmission oil level before you
take up operation and after every 50 oper-
ating hours (oil dipstick (A/9).
The machine parked in horizontal position,
the oil level is between the notches max.
and min. .
l
Remove oil dipstick, clean with a clean
cloth and put it back in.
l
Remove the dipstick again and read the
oil level, refill transmission oil, if necessary.
Change transmission oil after the first 50
operating hours and after every 200 operat-
ing hours while the engine is still warm.
Clean the oil filler plug (A/9) and the drain
plug (A/13) as well as the surrounding parts.
Change oil, collect the old oil in a proper
container and dispose of properly.
I
Check and exchange o-rings, if
necessary. Tighten the drain plug!
For filling quantity and oil quality refer to
"Specifications”.
Drive wheels
l
When commissioning the mower and
each time you change wheels, check and
tighten wheel bolts and nuts after the first 2
operating hours with 100 Nm; Proceed like-
wise when doing maintenance work.
l
Retighten the wheel flange locking nuts
(A/12) after the first 2 operating hours, then
every 50 operating hours with 100 Nm.
l
Check the tyre air pressure regularly. For
smooth driving, make sure that there is the
same pressure in both tyres.
6
6
6
6
6
(50 h)
200 h
6
6
6
6
6
A; 50 h
100 Nm
5
6
6
6
6
6
(2 h)
50 h