agria
Power Mower 5400
19
3
3. Devices and Operating Elements
The power mower agria type 5400 is
suited for all common applications and
tasks in farming and forestry and for win-
ter service operation.
Available attachments:
l
Cutter bars in different versions and
work widths.
l
Snowplough
l
For a choice of further attachments,
e.g. strake wheels, refer to our price-
list.
Engine
The four-stroke petrol engine runs on
commercial petrol (refer to fuel recom-
mendations p 6).
During the first 20 operating hours
(break-in period) do not use engine to
maximum power. Even after break-in
period never use engine at higher
speed than necessary for the work in
hand.
I
High engine speed is harmful to
any engine and considerably
affects its durability. This applies es-
pecially for no load operation. Any
overspeed (have the engine roar) can
result in immediate damage.
Cooling system
Cooling system is fan-cooled. Therefore
keep grille at recoil starter and cooling
fins of cylinder clean and free from
sucked-in plant trash.
Idling speed
Always ensure that idling-speed is ad-
justed correctly. At low speeds and with
the speed control lever set to idle, the
engine is supposed to run smoothly and
without run-out.
Air filter
The air filter purifies the air taken in. A
clogged filter affects engine output.
Ignition system
The engine is equipped with a mainte-
nance-free, contactless electronic igni-
tion system. We recommend to have
necessary checkups done by an expert
only.
Speed control lever
The speed control lever (B/9 or D/9) on
the steering handle is for stepless con-
trol of engine speed from min = IDLING
GAS to max = FULL THROTTLE to fit
requirements.