6.
Make sure all parts are intact,If parts are worn or damaged, replace them before flying.
7.
Make sure that the propeller is undamaged and securely installed, the blade arm is fully
extended, and the arm folds are fastened.
1.4. Safe flight
1.
Do not pick up or call during the flight.
2.
Please return as soon as possible when low battery warning
3.
Do not approach propellers and motors that are turning during work
4.
Please select the appropriate route based on the amount of pesticide and battery power
5.
Never operate the drone while under the influence of alcohol or drugs
6.
After landing, cut off the drone power firstly and then turn off the remote control to prevent
accidents.
7.
Don't add extra load to ensure flight under takeoff weight below 40kg, so as to avoid danger
8.
The use of A22 plant protection drones has certain security risks and is not suitable for by
persons under 18 years old
9.
During the flight of the drone, pay attention to the drone status data (such as battery power,
satellite count, etc.) feed back by the ground station.
1.5. Maintenance
1.
A22 storage environment: clean and tidy, ventilated and moisture-proof, avoid
high temperature.
2.
Please check and replace any deformed or damaged propellers before each flight.
3.
When not working or during transportation, be sure to remove or empty the tank
to avoid damaging the landing gear.
4.
Clean the pipeline of the working drone in time after the operation, regularly
check the working drone, and upgrade the drone firmware version in time.
1.6. Flight restrictions and local regulations
Flight restrictions
According to the ICAO and national air traffic control regulations on airspace control and the
regulation of drones, drones must fly in the prescribed airspace. For flight safety reasons, flight
restrictions are enabled by default, including altitude and distance restrictions and no-fly zones,
to help users use this product more safely and legally. In positioning mode (with GPS or RTK),
altitude and distance restrictions affect flight. In attitude mode, it is only limited by altitude, and
the maximum altitude of actual flight will not exceed 20m.
Height and distance restrictions
The maximum altitude is used to limit the flying height of the drone, and the maximum radius is
used to limit the flying distance of the drone.The user can configure the maximum height and
maximum radius values in the assistant software.After the configuration is completed, the range
that the drone can fly normally will be limited to the cylindrical airspace as shown below
