The flying height and speed are related to the manual operation amount of the stick, and the
actual flow rate is related to the set spray mode and water pump mode.
5.5.3.
AB point operation mode
After manually operating the drone to set points A and B at both ends of the ground, the drone
will automatically pan to the left or right according to the set AB line. The operation is precise
and efficient, and it is suitable for operations with neat borders of fields.
5.5.3.1. AB point operation flow
Enter the APP execution working interface
——
click "Start working"
——
select AB working
——
set working parameters
——
unlock takeoff
——
operate the drone to a suitable position at the
end of the field
——
click APP "A" to mark point A successfully, the tail light is yellow Steady light
——
the drone starts spraying in accordance with the set parameters
——
Operate the drone to a
suitable position on the other end of the field
——
Click APP "B" to mark point B successfully, the
tail light is always green
— —
select the heading direction
— —
manually control the remote
tips:
a.
It is recommended to enter the manual operation through the APP when the drone is not taking off,
and then confirm or adjust the flight and spraying parameters before starting the operation to avoid
excessive power consumption caused by hovering in the air with pesticide and reducing the
operating efficiency. !!
b.
The number of mu is calculated according to a fixed spray width of 3.5 meters, so the more regular
the route of manual flight, the more accurate the number of Ha!
c.
For manual operation, only manual spraying and spraying with speed can be selected!
