Agilent Technologies N6700B, User Manual

Page: 4 / 206

4 Series N6700 User’s Guide
In this Book
Specific chapters in this manual contain the following information:
Quick Reference – Chapter 1 is a quick reference section that
helps you quickly become familiar with your Agilent N6700
Modular Power System. It describes the differences between the
various modules in the power system.
Installation – Chapter 2 describes how to install your power
system. It describes how to connect various loads to the output. It
discusses remote sensing as well as parallel and series operation.
Getting Started – Chapter 3 describes how to set the voltage,
current, over-voltage protection, and turn on the output. It also
describes how to configure the remote interface.
Operating the Power System – Chapter 4 describes how to use
the advanced features of the power system using the front panel
menus and the corresponding SCPI commands.
Introduction to Programming – Chapter 5 gives a brief overview
of the SCPI command structure and basic programming concepts.
Language Dictionary – Chapter 6 describes all of the SCPI
programming commands.
Programming Examples – Chapter 7 provides Visual Basic
example programs that illustrate some common applications.
Specifications – Appendix A describes specifications and
supplemental characteristics.
Verification and Calibration Procedures – Appendix B explains
the verification and calibration procedures.
Using the Digital Port – Appendix C describes how to configure
and use the digital port on the back of the instrument.
Service – Appendix D describes what to do if service is required.
Compatibility – Appendix E documents the compatibility
commands of the Agilent Series 662xA DC power supplies that
are supported by the Agilent N6700 Modular Power System.
NOTE You can contact Agilent Technologies at one of the following telephone
numbers for warranty, service, or technical support information.
In the United States: (800) 829-4444
In Europe: 31 20 547 2111
In Japan: 0120-421-345
Or use our Web link for information on contacting Agilent in your country or
specific location:
www.agilent.com/find/assist
Or contact your Agilent Technologies Representative.
The web contains the most up to date version of the manual. Go to
http://www.agilent.com/find/N6700 to get the latest version of the manual.