Agilent Technologies N6700B, User Manual

Page: 188 / 206

Appendix D Service
188 Series N6700 User’s Guide
Command Errors (continued)
−
108 Parameter not allowed
More parameters were received than were expected.
−
109 Missing parameter
Fewer parameters were received than were expected.
−
110 Command header error
An error was detected in the header.
−
111 Header separator error
A character that was not a valid header separator was found in the command string.
−
112 Program mnemonic too long
The header contains more than 12 characters.
−
113 Undefined header
A command was received that was not valid for this instrument.
−
114 Header suffix out of range
The value of the numeric suffix is not valid.
−
120 Numeric data error
Generic numeric data error.
−
121 Invalid character in number
An invalid character for the data type was found in the command string.
−
123 Exponent too large
The magnitude of the exponent was larger than 32000.
−
124 Too many digits
The mantissa of a numeric parameter contained more than 255 digits, excluding leading zeros.
−
128 Numeric data not allowed
A numeric parameter was received but a character string was expected.
−
130 Suffix error
Generic suffix error
−
131 Invalid suffix
A suffix was incorrectly specified for a numeric parameter.
−
134 Suffix too long
The suffix contains more than 12 characters.
−
138 Suffix not allowed
A suffix is not supported for this command.
−
140 Character data error
Generic character data error
−
141 Invalid character data
Either the character data element contains an invalid character, or the element is not valid.
−
144 Character data too long
The character data element contains more than 12 characters.
−
148 Character data not allowed
A discrete parameter was received, but a string or numeric parameter was expected.
−
150 String data error
Generic string data error
−
151 Invalid string data
An invalid character string was received. Check that the string is enclosed in quotation marks.
−
158 String data not allowed
A character string was received, but is not allowed for this command.