Agilent Technologies Infiniium 8000A, Programmer'S Reference Manual

Page: 427 / 934

20- 7
Limit Test Commands
TEST
TEST
Command :LTESt:TEST {{ON | 1} {OFF | 0}}
The LTESt:TEST command controls the execution of the limit test function.
ON allows the limit test to run over all of the active measurements. When the
limit test is turned on, the limit test results are displayed on screen in a window
below the graticule.
Example
The following example turns off the limit test function.
10 OUTPUT 707;”:LTEST:TEST OFF”
20 END
Query :LTESt:TEST?
The query returns the state of the TEST control.
Returned Format
[:LTESt:TEST] {1 | 0} <NL>
Example The following example returns the current state of the limit test and prints the
result to the controller’s screen.
10 DIM TEST$[50]
20 OUTPUT 707;”:LTEST:TEST?”
30 ENTER 707;TEST$
40 PRINT TEST$
50 END
The result of the MEAS:RESults? query has two extra fields when
LimitTESt:TEST is ON (failures, total). Failures is a number and total is the
total number of measurements made.