6- 40
Sample Programs
init.bas Sample Program
1040 !
1050 !
1060 SUB Auto_msmts
1070 COM /Io/@Scope,@Path,Interface
1080 REAL Freq,Vpp
1090 DIM Vpp_str$[64]
1100 DIM Freq_str$[64]
1110 Bytes_read=0
1120 !
1130 ! Error checking on automatic measurements can be done using one of
two methods.
1140 ! The first method requires that you turn on results in the Measurement
subsystem
1150 ! using the command ":MEASure:SEND ON". When this is on, the
oscilloscope will return the
1160 ! measurement and a result indicator. The result flag is zero if
the measurement
1170 ! was successfully completed, otherwise a non-zero value is returned
which indicates
1180 ! why the measurement failed. See the Programmer's Manual for
descriptions of result
1190 ! indicators. The second method simply requires that you check the
return value of
1200 ! the measurement. Any measurement not made successfully will return
with the value
1210 ! +9.999e37. This could indicate that either the measurement was
unable to be
1220 ! performed or that insufficient waveform data was available to make
the measurement.
1230 !
1240 ! METHOD ONE
1250 !
1260 OUTPUT @Scope;":MEASure:SENDvalid ON" !turn on results
1270 OUTPUT @Scope;":MEASure:VPP? CHANnel1" !Query volts peak-to-peak
1280 ENTER @Scope;Vpp_str$
1290 Bytes_read=LEN(Vpp_str$) !Find length of string
1300 CLEAR SCREEN
1310 IF Vpp_str$[Bytes_read;1]="0" THEN !Check result value
1320 PRINT
1330 PRINT "VPP is ";VAL(Vpp_str$[1,Bytes_read-1])
1340 PRINT
1350 ELSE
1360 PRINT
1370 PRINT "Automated vpp measurement error with result
";Vpp_str$[Bytes_read;1]
1380 PRINT
1390 END IF
1400 !
Summary of Contents for Infiniium 8000A
