Agilent Technologies Infiniium 8000A, Programmer'S Reference Manual

Page: 378 / 934

16-36
Function Commands
VERSus
VERSus
Command :FUNCtion<N>:VERSus <operand>,<operand>
The :FUNCtion<N>:VERSus command defines a function for an X-versus-Y
display. The first operand defines the Y axis and the second defines the X axis.
The Y-axis range and offset are initially equal to that of the first operand, and
you can adjust them with the RANGe and OFFSet commands in this subsystem.
<N>
An integer, 1 - 4, representing the selected function.
<operand>
{CHANnel<n> | FUNCtion<n> | WMEMory<n> | <float_value>}
CHANnel<n> is:
An integer, 1 - 2, for two channel Infiniium Oscilloscopes.
An integer, 1 - 4, for all other Infiniium Oscilloscope models.
FUNCtion<n> and WMEMory<n> are:
An integer, 1 - 4, representing the selected function or waveform memory.
<float_value> is:
A real number from -1E6 to 1E6.
Example This example defines function 1 as an X-versus-Y display. Channel 1 is the X
axis and waveform memory 2 is the Y axis.
10 OUTPUT 707;":FUNCTION1:VERSUS WMEMORY2,CHANNEL1"
20 END
Functions Used as Operands
A function may be used as a source for another function, subject to the following
constraints:
F4 can have F1, F2, or F3 as a source.
F3 can have F1 or F2 as a source.
F2 can have F1 as a source.
F1 cannot have any other function as a source.