Agilent Technologies BioCel 1200, User Manual

Page: 72 / 106

Chapter 4: Performing a run
BioCel User Guide
66
7. Turn off environmental controls and temperature-controlled water
baths.
Related topics
Turning Off the BioCel
About this topic
This topic describes how to shut down the BioCel. The procedure for
turning off the BioCel is the same as the procedure for turning on the
BioCel except that you do not need to press the green reset button.
When to use
Shut down the BioCel when you intend to:
❑
Move it
❑
Leave it unused overnight or for an extended period of time
Procedure
To shut down the BioCel:
1. Make sure you have performed a clean-up after the last run.
2. Exit VWorks.
3. If you have a secondary computer:
a. Exit any software running.
b. Shut down the secondary computer (through Windows).
Wait for the operating system to shut down.
4. Shut down the main computer through Windows.
Wait for Windows to exit.
5. Turn off the computer monitor.
6. If you use modules or devices that require a vacuum pump,
optionally turn off power at the pump if the pump has an on/off
switch.
7. Turn off the Robot power on the power panel.
8. Turn off the System power on the power panel, if applicable to your
BioCel.
For information about... See...
Turning off the BioCel “Turning Off the BioCel” on page 66
Shutting down the software VWorks User Guide
Working with logs VWorks User Guide