Agilent Technologies BioCel 1200, User Manual

Page: 60 / 106

Chapter 3: Preparing for a run
BioCel User Guide
54
Related topics
Setting up the PlateHub
About this topic
This topic describes how to set up the PlateHub.
Procedure
To set up the PlateHub:
1. Make sure that the racks are in the appropriate locations as defined
in the PlateHub profile.
2. Remove racks by grabbing the rack handle and pulling up to slide
the rack out.
3. Fill the racks and slide them back into position.
4. Make sure rack locations and other PlateHub parameters are set
correctly in the PlateHub Diagnostics.
Related topics
For information about... See...
Troubleshooting bar code reader
errors VWorks User Guide
Positioning the bar code reader VCode User Guide
Workflow this procedure belongs
to “Workflow for preparing the BioCel for
a Run” on page 42
00257
BioCel
Plate h
ub tower removal
00257
Rack handle
For information about... See...
Changing PlateHub rack locations Device Driver User Guide