Agilent Technologies BioCel 1200, User Manual

Page: 30 / 106

Chapter 2: BioCel overview
BioCel User Guide
24
PlateLoc air filter
!! IMPORTANT !!
PlateLoc devices intended for use with the
BioCel do not contain an air filter. If you plan to remove a BioCel
PlateLoc for use in stand-alone mode, you must contact Velocity11
Service Center and arrange to have a filter installed. Without a filter
your PlateLoc can become damaged.
Main computer and
UPS
The location and model of these components depend on how your
BioCel is configured. They might be rack mounted, or they might be
towers. The model used depends on what other devices and equipment
are on your BioCel.
The illustration below shows the two possible models.
Communication
hubs
The Ethernet and RS-232 hubs form communication connections
between a single cable connected to the computer and multiple cables
going to devices. This allows the BioCel’s computer to communicate
with many devices at once.
BioCel 1200
Communication hubs are mounted beneath the BioCel deck inside the
side doors. The location of the hubs vary, according to your specific
design, and they might not be located together.
00245
BioCel 1200
CPU and UPS
00245
UPS
Computer
00251
BioCel
Biocel1800 shelf mount
00251
Computer
UPS