4 Setting up the BenchCel device
Creating profiles
80
BenchCel Microplate Handler User Guide
10
Click
Update this profile
to save the changes.
VWorks Plus only
. If an audit trail is being logged, the Audit Comment dialog box
opens. Select or type the audit comment, and then click
OK
.
11
To establish communication with the BenchCel Microplate Handler, click
Initialize
this profile
.
CAUTION
To prevent a potential hardware collision, make sure you have verified the
teachpoints before using a profile.
If you are setting up the BenchCel Microplate Handler for the first time, return to
“Creating BenchCel device in the VWorks software” on page 68
and select the profile
name (step 5).
About the profile logs
VWorks 14.0 and later versions only.
The Profiles page contains two log areas:
•
Table of variables that have been modified since the last time the profile was
updated. The table lists the old and new values for each setting you change. The
software clears the table when you click Update this profile, and logs the
information in the text box at the bottom of the page.
•
Text box that contains a running log of updates to profiles for the current
diagnostics session. This profile log activity is included in the VWorks Main Log. For
details on the Main Log, see the
VWorks Automation Control User Guide
.
