5 Setting sensor thresholds
Calculating the Orientation threshold
112
BenchCel Microplate Handler User Guide
4
Calculate the Orientation threshold as follows:
Orientation threshold = (Notch
highest
+ Corner
lowest
)/2
In the following example, the calculated threshold is 135.
5
On the
Jog/Teach
tab, type the calculated
Orientation threshold.
After you finish setting the sensor thresholds for the specific type of labware, you can
use the labware in a protocol.
Related information
Highest notch reading among all stacks
35
Lowest corner reading among all stacks
235
Orientation threshold (midpoint)
135
For information about…
See…
Overall workflow for setting sensor
thresholds
“Overview for setting sensor thresholds”
on page 100
Previous steps in this workflow
•
“Calculating the Plate presence
threshold” on page 102
•
“Determining the optimum Orientation
sensor offset” on page 107
Worksheet for sensor thresholds
