43
3 Installing BenchCel Microplate Handler
Unpacking BenchCel Microplate Handler
BenchCel Microplate Handler User Guide
Procedure
CAUTION
The packing materials and shipping container were designed to protect the device.
Packing the BenchCel device using other materials might damage the device and
void your warranty. Save the packing materials and shipping container in case you
are required to move or ship the BenchCel device.
To unpack the BenchCel Microplate Handler:
1
Use a large screwdriver to open the BenchCel device shipping container.
2
Lift the contents out of the container and set each item carefully on the lab bench
or final location where you want to install the device.
3
Remove the packing foam from the device.
4
Remove components from the plastic bags or other packing material.
5
Inspect the unpacked items.
About installing risers
The 146-mm tall risers can be installed to the underside of the BenchCel device at each
end to lift the device above the table surface. The risers are required for integrating the
BenchCel device with certain devices in a workstation. In you are integrating a
BenchCel Microplate Handler on risers, the Agilent installer will install the BenchCel
risers before mounting the robot head on the BenchCel device.
