3 Installing BenchCel Microplate Handler
Connecting the power source
50
BenchCel Microplate Handler User Guide
Connecting the power source
About this topic
This topic explains how to connect the BenchCel Microplate Handler to a grounded
power source.
Before you start
Make sure you have the supplied power cord.
WARNING
Ensure that the power cords are in good condition and are not frayed. Use of frayed or
damaged power cords can cause injury. Use of incorrect power cords can cause
damage to the device.
Connecting the power source
To connect the BenchCel device to a grounded power source:
1
Plug one end of the power cord into the AC power entry located on the back of the
BenchCel Microplate Handler.
Figure
Connectors on the back of the BenchCel Microplate Handler
2
Plug the other end of the cord into an AC outlet with grounded circuit.
Related information
For more information about…
See…
Electrical requirements
“Verifying laboratory requirements” on
page 37
Installing the BenchCel Microplate
Handler
