Setting the teachpoints
Teaching part 2: Adjusting teachpoints for accessories
64
AssayMAP Bravo Platform Installation Guide
Note:
Additional accessories will appear in the image if you have
configured them in this profile.
3
In the
Location
list, locate the
Z-axis
box. Write down the Z- axis value on a
piece of paper. You will use this value in a subsequent step.
Note:
The Z- axis teachpoint value for deck location 1 is typically
between 105.2–105.8 mm for a standard height AssayMAP Bravo Platform
and standard platepad.
4
In the
Approach height above teachpoint
box, type
50
, and then click
Approach
.
