![Agilent Technologies 93000 SOC Series Training Manual Download Page 245](http://html1.mh-extra.com/html/agilent-technologies/93000-soc-series/93000-soc-series_training-manual_2868631245.webp)
9-10 X-modes
Timing Setup
Agilent 93000 SOC Series User Training Part 1, October 2004
245
9-10 X-modes
The term x- mode refers to the possibility of executing more than one
DUT cycle (as defined by the
period
keyword of an ASCII device cycle)
in one tester cycle (as defined in a timing set). The basic idea is to
combine the actions of a state character sequence into one waveform,
and to expand the length of the tester cycle accordingly.
Using x-modes allows you to test devices with a period that is smaller
than the smallest possible tester cycle length (which depends on the
tester model). It can also be used to save Vector Memory, because the
number of binary vectors to be stored is only a fraction of the ASCII
vectors (depending on the x-mode factor). When you use Xmodes for
higher data rates, you automatically get vector compression as well.
Pin cards may have 7, 14, 28, 56, or 112 MV. X-modes is useful in vector
compression as each vector can hold 3 bits of data with an X3 wavet-
able. For example:
• 28 * 3 = 84 million bits of data on a 28MV pin card
• 56 * 3 = 168 million bits of data on a 56 MV pin card
• 112 * 3 = 336 million bits of data on a 112 MV pin card
As mentioned above, the specific tester speed is dependent on the
tester model. In the X1 mode:
• P1000 = 4ns (250 Mbit)
• P800 = 5ns (200 Mbit)
• P600 = 6ns (167 Mbit)
• C400e = 6ns (and 2ns pulse width and less EPA)
• C200e = 20ns (50 Mbit)
In the X3 mode:
• P1000 = 4ns (750 Mbit)
• P800 = 5ns (600 Mbit)
• P600 = 6ns (500 Mbit)
• C400e = 6ns (and 2ns pulse width [500 Mbit] and less EPA)
• C200e = 20ns (150 Mbit)
In the X5 mode:
• P1000 = 4ns (1250 Mbit)
• P800 = 5ns (1000 Mbit)
Summary of Contents for 93000 SOC Series
