![Agilent Technologies 93000 SOC Series Training Manual Download Page 124](http://html1.mh-extra.com/html/agilent-technologies/93000-soc-series/93000-soc-series_training-manual_2868631124.webp)
Defining the Pins
7-3 Entering the Pin Configuration
124
Agilent 93000 SOC Series User Training Part 1, October 2004
Enter Pin information
4
Enter the Pin Name.
The name may be up to 16 characters long.
N O T E
SmarTest addresses each device signal pin byb referring to the pin
names that you define in the Pin Configuration file.
5
Enter the Pin Mode.
You can only select standard mode (
STD
).
6
Enter the Pin Type.
The pin type can be one of the following:
I
,
O
,
IO
,
DC
,
DPS
+.
DPS-
is
not used for a DPS integrated in the testhead. It is still available for
compatibility reasons when external power supplies are used. Even
if your power supply voltage is negative you use
DPS+
and program
a negative voltage.
7
Either
(for I/O channels)
–
Enter the Series Resistor.
Be extremely careful that these really match the resistors on the
DUT board.
Or
(for DPS pins)
–
Enter the Bypass Capacitor (DPS pins).
This entry determines the operating range of the DPS.
8
Enter the Tester Channel.
IO channel syntax
The Agilent 93000 test system assigns pins to its channel resources
with a 5-digit number, such as 10101. The Syntax for the channel
specification of an IO channel is
aaabb
where
a
is the card cage slot number/pogo block number
(range 101 ... 401)
bb
is the channel number (range 01 ... 16)
The first three digits represent the slot number assigned for each
pogo block on the DUT board, for example 101 or 201. The final two
digits represent the channel number assigned for each pin of the
pogo block, with a range of 01-16.
The correct channel number and cardcage number for a particular
DUT pin can be found in the corresponding DUT board design guide
(p. 126)).
Examples:
10101, 11405 would be valid channel specifications. Channel speci-
fication 10101 indicates channel 01 of the channel board in slot 101,
cardcage 1. Channel specification 11405 incicates channel 05 of the
channel board in slot 114, cardcage 4.
Summary of Contents for 93000 SOC Series
