Agilent Technologies 85052C, User'S And Service Manual

Page: 9 / 62

85052C 1-5
General Information
Calibration Kit Overview
Calibration Definitions
The calibration kit must be selected and the calibration definitions for the devices in the
kit installed in the network analyzer prior to performing a calibration. Refer to your
network analyzer user’s guide for instructions on selecting the calibration kit and
performing a calibration.
The calibration definitions can be:
• already resident within the analyzer
• loaded from the calibration definitions disk (see Table 6-2 on page 6-3 )
• entered from the front panel
Analyzer Families Supported by this Calibration Kit
The calibration definitions for the kit are permanently installed in the internal memory or
hard disk of the following analyzer families.
• 8753
• PNA Series
•
872x Series
If this calibration kit is used with other analyzers, the calibration definitions must be
manually entered into the analyzer. Refer to your analyzer’s user’s guide for instructions.
Options
The following option is available for the 85052C:
Option 910
This option adds an additional copy of the operating and service package.
Equipment Required but Not Supplied
Gages, connector cleaning supplies, and various electrostatic discharge (ESD) protection
devices are not supplied with the calibration kit but are required to ensure successful
operation of the kit. Refer to
Table 6-2 on page 6-3 for ordering information.