Agilent Technologies 85052C, User'S And Service Manual

Page: 48 / 62

A-4 85052C
Standard Definitions
Standard Class Assignments
IMPORTANT The following calibrations are only supported by certain PNA analyzers. See
your PNA network analyzer embedded help system.
Notes:
1. If you are performing a TRL calibration:
• S
21
T and S
12
T must be defined as thru standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as line standards.
2. If you are performing a TRM calibration:
• S
21
T and S
12
T must be defined as thru standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
3. If you are performing an LRM calibration:
• S
21
T and S
12
T must be defined as line standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
4. S
11
B and S
11
C must be defined as the same standard.
5. S
22
B and S
22
C must be defined as the same standard.
Table A-3 Standard Class Assignments for the PNA Series Network Analyzer
Calibration Kit Label:
3.5 mm TRL Model 85052C
Class
A
a
S
11
A 1
S
11
B 2
S
11
C 2
S
21
T 4
S
22
A 1
S
22
B 2
S
22
C 2
S
12
T 4
a. For additional ports, make sure values
match the correct sex of the port.