Agilent Technologies 85052C, User'S And Service Manual

Page: 51 / 62

85052C A-7
Standard Definitions
Standard Class Assignments
IMPORTANT The following calibrations are only supported by certain PNA analyzers. See
your PNA series network analyzer embedded help system.
Notes:
1. If you are performing a TRL calibration:
• S
21
T and S
12
T must be defined as thru standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as line standards.
2. If you are performing a TRM calibration:
• S
21
T and S
12
T must be defined as thru standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
3. If you are performing an LRM calibration:
• S
21
T and S
12
T must be defined as line standards.
• S
11
A and S
22
A must be defined as reflection standards.
• S
11
B, S
11
C, S
22
B, and S
22
C must be defined as match standards.
4. S
11
B and S
11
C must be defined as the same standard.
5. S
22
B and S
22
C must be defined as the same standard.
Table A-6 Blank Form for the PNA Series Network Analyzer
Calibration Kit Label:
________________________________
Class
A
a
S
11
A
S
11
B
S
11
C
S
21
T
S
22
A
S
22
B
S
22
C
S
12
T
a. For additional ports, make sure values
match the correct sex of the port.