Agilent Technologies 81610A User Manual Download Page 8

Page: 8 / 118

The Structure of this Manual

Safety Considerations

Agilent 81610A/11A/12A/13A/14A Return Loss Module, Fifth Edition

The Structure of this Manual

This manual is divided into two categories:

• Getting Started

This section gives an introduction to the Tunable Laser modules.

and aims to make these modules familiar to you:

–

“Getting Started with Return Loss” on page 11

• Additional Information

This is supporting information of a non-operational nature. this

contains information concerning accessories, specifications, and

performance tests:

–

“Accessories” on page 45

–

“Specifications” on page 49

–

“Performance Tests” on page 59

Conventions used in this manual

• Hardkeys are indicated by italics, for example,

Config

, or

Channel

• Softkeys are indicated by normal text enclosed in square brackets,

for example, [Menu] or [Details].

• Parameters are indicated by italics enclosed by square brackets, for

example, [

RLref

], or [

Para

• Menu items are indicated by italics enclosed in brackets, for

example, <

Terminated Calibration

>, or <

Continuous

Summary of Contents for 81610A























































































































Search results

Summary of Contents for 81610A

Reviews:

Agilent Technologies 81610A, User Manual, Page: 8 / 118

Search results

Summary of Contents for 81610A

Reviews: