Agilent Technologies 4338B, Operation Manual

Page: 82 / 228

Front P anel 4338B
Engineering units K ey
The Engineering units key enters engineering units . The available engineering units are:
f (femto) 2 10
015
p (pico) 2 10
012
n (nano) 2 10
09
(micro) 2 10
06
m (milli) 2 10
03
k (kilo) 2 10
3
M (mega) 2 10
6
G (giga) 2 10
9
T (tera) 2 10
12
Press , the unit is displayed in increasing order . Press , the unit is displayed in
decreasing order .
Back Space K ey
The Back Space key deletes a single preceding character of an input value .
Minimum K ey
The Minimum key enters the minimum value during a setting operation.
Maximum K ey
The Maximum key enters the maximum value during a setting operation.
Comparator K ey
The Comparator key toggles the comparator function ON and OFF . The default comparator
function is OFF .
The Comparator distinguishes whether or not the measurement result is within the upper
and lower comparator limits for primary and secondary measurement parameter . When the
comparator function is ON, the Comprtr On annunciator( 9 ) will be displayed. The comparison
results output is assigned as follows:
Destination Condition
Comparison Display : HIGH, IN, LOW , N.C.
Handler Interface : HIGH, IN, LOW , N.C.
Beep (F AIL mode) : HIGH, LOW , N.C.
(P ASS mode) : IN
Where ,
HIGH greater than the upper limit
IN between the upper limit and the lower limit
LOW less than the lower limit
N.C. contact check failed
When measurement parameter changes , the comparator function is automatically turned OFF .
3-10 Function Reference
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com