Agilent Technologies 4338B, Operation Manual

Page: 102 / 228

T o Set Up the 4338B 4338B
T o Use Comparator Function
The following commands control the comparator function:
:CALC{1|2}:LIM:CLE
:CALC{1|2}:LIM:FAIL?
:CALC{1|2}:LIM:LOW
:CALC{1|2}:LIM:LOW:STAT
:CALC{1|2}:LIM:UPP
:CALC{1|2}:LIM:UPP:STAT
:CALC{1|2}:LIM:STAT
f 1j 2g shows that one of the two numbers is attached to the root mnemonic; 1 means the
primary parameter and 2 means the secondary parameter .
F or example , to set the limit values for the primary parameter , and to enable the comparator
function,
:
OUTPUT 717;":CALC1:LIM:LOW 1E-2; UPP 1E-1"
OUTPUT 717;":CALC1:LIM:STAT ON"
:
T o Display a Deviation Measurement
The following commands displays a deviation measurement:
:DATA
:CALC{1|2}:MATH:EXPR:NAME
:CALC{1|2|:MATH:EXPR:CAT?
:CALC{1|2}:MATH:STAT
f 1j 2g shows that one of the two numbers is attached to the root mnemonic; 1 means the
primary parameter and 2 means the secondary parameter .
F or example , to set the reference values using the measured values , and to calculate the
absolute value of deviation for the primary parameter ,
:
OUTPUT 717;":FETC?"
ENTER 717;s,d1,d2
OUTPUT 717;":DATA REF1,";d1
OUTPUT 717;":CALC1:MATH:EXPR:NAME DEV"
OUTPUT 717;":CALC1:MATH:STAT ON"
:
T o W ait Until Previously Sent Commands are Completed
The following commands make the 4338B wait until the previously sent commands are
completed:
*OPC
*OPC?
*WAI
F or example , to wait until the OPEN correction is completed,
OUTPUT 717;":SENS:CORR:COLL STAN2" P erform SHORT Correction
OUTPUT 717;"*OPC?" W ait for Open Correction completed
ENTER 717;A
4-8 Remote Operation
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com