Agilent Technologies 4338B, Operation Manual

Page: 196 / 228

Functional T est 4338B
Handler Interface Functional T est
The 4338B 's handler interface function is tested using the built-in selftest and the handler
interface tester .
T est Equipment
Description Recommended Model
Handler Interface T ester 04339-65007
Procedure
Initial Setup .
1. Turn the 4338B OFF .
2. Set the LED PW switch on the Handler Interface T ester to OFF, and set the IN1, IN2, IN3,
and IN4 switches to 0.
3. Set up the equipment as shown in Figure 9-4
Figure 9-4. Handler Interface Functional T est Setup
4. Turn the 4338B ON.
5. Reset the 4338B using the following procedure .
a. Press to display the system reset menu.
b. Press or until Yes blinks , and press .
K ey Lock Function T est.
6. Set the IN4 switch on the Handler Interface T ester to 1.
7. Conrm that the all keys on the 4338B's front panel are locked out.
8. Set the IN4 switch on the Handler Interface T ester to 0.
External Trigger Function T est.
9. Press to set the trigger mode to External.
10. Press the IN5 switch on the Handler Interface T ester , and conrm that the 4338B is
triggered.
9-14 Maintenance
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com