Agilent Technologies 4338B, Operation Manual

Page: 222 / 228

Overload/Over-V oltage/No-Contact Operations 4338B
-223 T oo much data
A legal program data element of block, expression, or string type was received that contained
more data than the 4338B could handle due to memory or related device-specic requirements .
-230 Data corrupt or stale
P ossibly invalid data; new reading started but not completed since last access .
-241 Hardware missing
A legal program command or query could not be executed because of missing 4338B hardware;
for example , an option was not installed.
-310 System error
Some error , termed \system error" by the 4338B , has occurred.
-311 Memory error
An error was detected in the 4338B 's memory .
-313 Calibration memory lost
The nonvolatile calibration data has been lost. When this error occurs during power-on test,
the 4338B stops operation and asserts the /ALARM signal on the handler interface . When this
error occurs during self-test, the 4338B continues operation and asserts the /ALARM signal.
Contact your nearest Agilent T echnologies oce .
-350 Queue overow
A specic code entered into the queue in lieu of the code that caused the error . This code
indicates that there is no room in the queue and an error occurred but was not recorded.
-400 Query errors
This is the generic query error that the 4338B cannot detect more specic errors . This code
indicates only that a query error as dened in IEEE 488.2, 11.5.1.1.7 and 6.3 has occurred.
-410 Query INTERRUPTED
A condition causing an interrupted query error occurred (see IEEE 488.2, 6.3.2.3); for example ,
a query followed by D AB or GET before a response was completely sent.
-420 Query UNTERMINA TED
A condition causing an unterminated query error occurred (see IEEE 488.2, 6.3.2.2); for
example , the 4338B was addressed to talk and an incomplete program message was received by
the controller .
-430 Query DEADLOCKED
A condition causing an deadlocked query error occurred (see IEEE 488.2, 6.3.1.7); for example ,
both input buer and output buer are full and the 4338B cannot continue .
-440 Query UNTERMINA TED after indenite response
A query was received in the same program message after an query requesting an indenite
response was executed (see IEEE 488.2, 6.5.7.5).
Messages-6
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com