Agilent Technologies 4338B, Operation Manual

Page: 48 / 228

Using Front-P anel K eys 4338B
Using Front-P anel K eys
The 4338B has four types of keys as follows:
Direct Execution Keys
T oggle Keys
Selection Keys
V alue Setup Keys
This section describes how to use the 4338B 's front panel keys .
Note
If you want to exit an operation and go back to the measurement display , press
several times .
Direct Execution K eys
Pressing a direct execution key will cause the pressed key's function to be performed
immediately . F or example ,
Press , and the 4338B 's front panel keys are locked out.
T oggle K eys
Pressing a toggle key will switch between several conditions . An annunciator will indicate the
current condition. F or example ,
Press , and the Meas Time annunciator( 9 ) alternately points to the current setting
(Short, Med or Long).
Selection K eys
Pressing a selection key will display the selection display . The blinking item is the one
currently selected. By using , , or the selection key itself, the selected (blinking) items
can be changed.
F or example , to perform the self test,
1. Press . Exit is blinking.
2. Press to blink Test .
3. Press . The self test will start immediately . After the test is nished, the 4338B will
display any existing error code , and return to the menu.
4. Select Exit and press to exit the menu.
1-14 Getting Started
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com