Agilent Technologies 4263B, Operation Manual

Page: 95 / 325

4263B
Range Setup K ey
The Range Setup key sets the measurement range , according to the following table .
T able 3-1. Measurement Range Selection
Range Setup Optimum Measurement Range Measurable Range
1
1 M
2
1 M j Zj < 10 M j Zj 900k
100 k
2
100 k j Zj < 1 M j Zj 90 k
10 k 10 k j Zj < 100 k j Zj 9 k
1 k 1 k j Zj < 10 k j Zj 900
100 10 < j Zj < 1 k All
10 1 < j Zj 10 j Zj 11
1 100 m < j Zj 1 j Zj 1.1
0.1
3
j Zj 100 m j Zj 110 m
1 A ccuracy not specied across this full range .
2 Not available when the test signal frequency is 100 kHz.
3 Not available when the test signal level is less than 315 mV .
\OVLD " is displayed on the LCD display when the measured impedance is out of the measurable
range .
The 4263B can display measurement result in the following ranges:
T able 3-2. Displayable Range
P arameter Displayable Range
Z 0.01 m 999.99 M
RS, RP,
DCR, X
6 0.01 m 6 999.99 M
Y 0.1 ns9999.9 s
GS, GP, B 6 0.1 ns 69999.9 s
CS, CP 6 1 fF 6 9.9999 F
P arameter Displayable Range
LS, LP,
L1, L2, M
6 0.1 nH 6 999.99 kH
D 6 0.0001 6 9.9999
Q 6 0.1 6 9999.9
0 180 + 180
N 6 0.9 999.99
\------- " is displayed on the LCD display when the measurement result is out of the
displayable range .
Trigger K ey
The Trigger key triggers a measurement when the 4263B is in the Manual trigger mode . See
also \Trigger Mode Key ".
3-8 Function Reference and T echnical Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com