Agilent Technologies 4263B, Operation Manual

Page: 132 / 325

4263B
f 1j 2g means that one of the two numbers must be attached to the root mnemonic , that is , the
word \CALC "; 1 means the primary parameter and 2 means the secondary parameter .
F or example , to set the limit values both for the primary and the secondary parameter , and to
enable the comparator function,
OUTPUT 717;":CALC1:LIM:LOW 1E-5"
OUTPUT 717;":CALC1:LIM:UPP 1E-4"
OUTPUT 717;":CALC2:LIM:LOW 1E-5"
OUTPUT 717;":CALC2:LIM:UPP 1E-4"
OUTPUT 717;":CALC1:LIM:STAT ON"
T o Display a Deviation Measurement
The following commands displays a deviation measurement:
:DATA
:CALC{1|2}:MATH:EXPR:NAME
:CALC{1|2}:MATH:EXPR:CAT?
:CALC{1|2}:MATH:STAT
f 1j 2g means that one of the two numbers must be attached to the root mnemonic , that is , the
word \CALC "; 1 means the primary parameter and 2 means the secondary parameter .
F or example , to set the reference values using the measured values , to set to calculate the
absolute value of deviation for the primary parameter , and to set to calculate the percent of
deviation for the secondary parameter ,
:
OUTPUT 717;":FETC?"
ENTER 717;s1,d1,d2
OUTPUT 717;":DATA REF1,";d1
OUTPUT 717;":DATA REF2,";d2
OUTPUT 717;":CALC1:MATH:EXPR:NAME DEV"
OUTPUT 717;":CALC2:MATH:EXPR:NAME PCNT"
OUTPUT 717;":CALC1:MATH:STAT ON"
OUTPUT 717;":CALC2:MATH:STAT ON"
:
T o W ait Until Previously Sent Commands are Completed
The following commands make the 4263B wait until the previously sent commands are
completed:
*OPC
*OPC?
*WAI
F or example , to wait until the OPEN correction is completed,
OUTPUT 717;":SENS:CORR:COLL STAN1"
OUTPUT 717;"*OPC?"
ENTER 717;A
Remote Operation (T o Control from a Computer) 4-11
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com