Agilent Technologies 4263B, Operation Manual

Page: 131 / 325

4263B
T o Set the A veraging Rate
The following commands set the averaging rate:
:SENS:AVER
:SENS:AVER:COUN
F or example , to set the averaging rate to 4,
OUTPUT 717;":SENS:AVER:COUN 4"
T o Set Trigger Delay Time
The following command sets trigger delay time:
:TRIG:DEL
F or example , to set trigger delay time to 10 ms ,
OUTPUT 717;":TRIG:DEL 1E-2"
T o Set Beeper Mode
The following commands set beeper mode:
:SYST:BEEP
:SYST:BEEP:STAT
:CALC1:LIM:BEEP
:CALC1:LIM:BEEP:COND
F or example , to set beeper mode to emit a beep when comparison result is P ASS.
OUTPUT 717;":CALC1:LIM:BEEP:COND PASS"
T o Lock Out the Front P anel K eys
The following command locks out the front panel keys:
:SYST:KLOC
F or example , to lock out the front panel keys ,
OUTPUT 717;":SYST:KLOC ON"
T o Check Contact Integrity at the T est Fixture
The following command checks contacts at the test xture:
:SENS:FIMP:CONT:VER
F or example , to enable the contact check function,
OUTPUT 717;":SENS:FIMP:CONT:VER ON"
T o Use the Comparator Function
The following commands control the comparator function:
:CALC{1|2}:LIM:CLE
:CALC{1|2}:LIM:FAIL?
:CALC{1|2}:LIM:LOW
:CALC{1|2}:LIM:LOW:STAT
:CALC{1|2}:LIM:UPP
:CALC{1|2}:LIM:UPP:STAT
:CALC{1|2}:LIM:STAT
4-10 Remote Operation (T o Control from a Computer)
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com