Agilent Technologies 4263B, Operation Manual

Page: 97 / 325

4263B
A ddress K ey
The A ddress key sets the 4263B 's GPIB address . The available GPIB addresses are the integer
numbers 0 to 30, and address 31 is the T alk Only mode in which the 4263B only outputs data
through the GPIB interface .
Resetting or powering o doesn't aect the 4263B 's address setting.
In T alk Only Mode , the output data format is ,
<stat>, <data1>, <data2>, <comp1>, <comp2>
Where , <stat> : Measurement status
0 : Normal
1 : Overload
2 : No-Contact
<data1> : Measurement data of the primary parameter
<data2> : Measurement data of the secondary parameter
<comp1> : Comparison result of the primary parameter (no output when the
comparator is OFF)
<comp2> : Comparison result of the secondary parameter (no output when the
comparator is OFF)
0 : OFF
1 : In
2 : High
4 : Low
8 : No-Contact
Save K ey
The Save Key stores the instrument's current settings into non-volatile memory (EEPROM).
Saved items are same as ones stored in the back-up memory listed in \LINE Switch "
description. Up to 10 sets of instrument settings can be saved. Y ou must enter the register
number , 0 to 9, to assign the register into which the settings will be saved.
Caution
The 4263B overwrites the instrument's settings into the assigned register
without warning. If settings are already stored in the assigned register , they
will be lost.
Recall K ey
The Recall Key is used to recall instrument settings saved in non-volatile memory (EEPROM)
(see \Save Key "). Y ou must enter the register number , 0 to 9, from which to
recall the settings . If the register selected is empty , the error message \RECALL F AILED" is
displayed.
Note
Recalling an 4263B setting doesn't aect the DC bias ON/OFF state .
3-10 Function Reference and T echnical Information
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com