54
Agilaire 8872 Manual
Chapter 2 Configuration
The Validation settings can be found in the Logger Channels editor:
When settings are made in the AirVision central server, they must be downloaded to the
8816/8832 or Sync’d with the 8872 to take effect. The server ONLY stores these settings for
download/sync, and does not act upon the settings in the Validation screen itself. They are used
in real-time by the logger’s real-time data processing engine.
Other Notes:
Note also that flags may be applied by the Automatic Data Validation Processor (ADVP) or in
the Data Editor (although any data edited in the Data Editor will also have an “E” editing flag).
Other status flags that appear in the Flags Detail and that can be applied via the Editor or ADVP
are as follows. None of these invalidate data (unless set to do so in the Flags Editor):
I = Invalidated Via Edited
? = Suspect Data
> = Exceedance Data
z = Zero Adjusted
Q = Quality Assured
m = Maintenance Data
a = Audit
p = Precision Check
E = Edited Data (automatically applied via any edit via Average Data Editor)
Note that some users may change the definition/label of these “Server Side Flags”.
