P1512134 R2
69
Problem
Cause
Solution
Conveyor doesn’t
drive.
Cushion block needs adjusting. Adjust needle valve by turning clockwise
1/8 of a turn - try and repeat if necessary,
refer to Ram and Travel Speed.
Pinion gear slipping or
binding.
Pinion gear not adjusted
properly.
Adjust the pinion gear. See Pinion Gear
Adjustment.
Frame/Undercarriage with Hand Winch
Problem
Cause
Solution
The conveyor will not
raise or lower.
The conveyor is already at its
maximum or minimum height.
If at maximum height, lower the conveyor.
Obstruction in the slide.
Clear the obstruction.
Faulty cable.
Replace cable.
Faulty winch.
Consult your local dealer.
The bottom or top of the
conveyor is obstructed.
Clear the obstruction.
The conveyor will not
stay elevated.
Faulty winch.
Lower conveyor to transport position and
repair or replace winch.
S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
