54
P1512134 R2
Section 7.8. – Inspect the Hopper Flashing on page 56
Section 7.9. – Check the Roller Bearings on page 56
Section 7.10. – Check the Roller Lagging on page 56
7.13. Inspect Belt Lacing on page 60
Annually:
Section 7.11. – Tension the Conveyor Belt on page 56
Section 7.12. – Align the Conveyor Belt on page 57
Section 7.16. – Clean and Wash the Equipment on page 62
When equipped:
Section 7.5. – Check the Gearbox Oil on page 55
2–3 Years:
7.14. Replace the Belt Lacing on page 60
When equipped:
Section 7.6. – Change the Gearbox Oil on page 55
As Required:
Section 7.17. – Tension the Drive Belts on page 62
Section 7.18. – Align the Drive Belts on page 63
Section 7.19. – Replace the Drive Belts on page 63
Section 7.20. – Repack the Wheel Bearings with Grease on page 63
Section 7.21. – Inspect and Service the Hand Winch and Lift Cable on page 64
7.15. Replace the Conveyor Belt on page 60
Section 7.22. – Pinion Gear Adjustment on page 64
7.3. Visually Inspect the Equipment
Check the following during a visual inspection:
1. Ensure all guards are in place and in good working order.
2. Examine the conveyor for damage or unusual wear.
3. Check tightness of bolts/nuts, fasteners, and hardware (re-torque if necessary).
4. Be sure all safety decals are in place and are legible.
5. Check that the discharge and intake area are free of obstructions.
6. Inspect all moving or rotating parts to see if anything has become entangled in them. Remove any entangled
material.
Lock out power before inspecting.
7. Inspect hydraulic hoses and fittings for leaks and wear. Fix or replace where necessary.
8. Check wheel bolts are tight and examine tires for gashes, uneven wear, or loss of air pressure. See
for recommended tire pressure.
S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
