40
P1512134 R2
Figure 12.
Wheel Over-Center Handle Positions
Engaged
Disengaged
2. Set and run the gas engine at approximately half throttle.
3. Refer to the controls shown in
or
4. Before moving the conveyor into position:
•
Fully lower the conveyor.
•
Raise the intake end slightly off the ground to position the conveyor.
•
Raise the conveyor discharge end only for final positioning such as when next to a storage bin or grain
truck.
Figure 13.
Wheel Move Kit Controls (1500 and 2000 Series)
S-DRIVE FIELD LOADER – PORTABLE GRAIN BELT CONVEYOR
