P - 11
Programming
P
Assigning the barred numbers ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
Lift
handset
Assign barred
numbers
h * Z U W
Iz
q
ª
Replace handset
Enter internal ID
and internal
phone number
Start programming mode:
h
*PRO
q
ª
(system PIN)
PRO
A
E
Off
On
Acknowledge-
ment tone
Selection
Continue programming or exit programming mode:
h
*END
q
ª
END
Entering terminal types
Settings are available dependent on the connected
terminal types
. Certain functions are then auto-
matically active.
Make the setting on every terminal:
- Telephone:
The knocking prevention is switched
off and can be switched on.
A call with the “Fax” service ID is not signalled.
- Answering machine:
The knocking prevention
is switched on permanently. Anyone can pick up
a call from this connection.
- Fax:
The knocking prevention is switched on per-
manently. A call cannot be picked up. The “Fax”
service is transmitted. Calls with the “Fax” serv-
ice ID are always signalled at this connection.
- Modem:
The knocking prevention is switched on
permanently. A call cannot be picked up.
- Combi-device:
A combi-device is a telephone
with integrated fax. In the combi-device a call is
generally assigned where it is to be signalled ac-
cording to the set ringing assignment irrespective
of the transmitted service ID. In the case of exter-
nal seizure with “0”, use the “Telephone” serv-
ice. In case of external seizure with “10” use the
“Fax” service.
The knocking prevention is switched on perma-
nently.
As-delivered state:
- Connection 1 – telephone, internal phone
number 11
- Connection 2 – telephone, internal phone
number 12
- Connection 3 – answering machine, internal
phone number 13
- Connection 4 – combi-device, internal phone
number 14
Start programming mode:
h
*PRO
q
ª
(system PIN)
PRO
Continue programming or exit programming mode:
h
*END
q
ª
END
h *TYP
V
q ª
Lift hand-
set
TEL
ANR
FAX
MOD
KOM
Tel
ephone
Answering machine
Fax
Mod
em
Combi-device
Selection
Type of terminal
Ackn. tone
Replace
handset
Vanity
E
L
E
nter
Delete
(telephone)
Selection
Summary of Contents for AC 14 analog
Page 1: ...AC 14 communication with Operating Manual ISDN PBX a system...
Page 2: ...I 2 Introduction...
Page 12: ...S 6 Set up...
Page 67: ...K 5 Key words K...