O - 8
Operation
Remote control (switch box)
Some functions of the telecommunications system
can be controlled remotely by making a telephone
call en route.
The following functions can be controlled remotely:
- release the telecommunications system for re-
mote maintenance and configuration of your
telecommunications system
- fix a cost limit for an internal subscriber of the
telecommunications system
- switch night service on/off
- switch timer on/off
- set diversions
- switch internal transfer on/off
- room monitoring
h
z
q
q
z
q p
Lift
handset
Ringing
tone 2 to
3 rings
Enter the multiple
subscriber number of
the switch box
Wait 5s internal
music on hold
(MoH)
Enter the box PIN of
the switch box
within 15 s as DTMF
characters
Wait 5 s MoH if
box PIN is correct
Operating steps for remote control:
- call the switch box of your telecommunications
system with the multiple subscriber number
(MSN) of the switch box.
- After 2 or 3 rings you will hear the internal mu-
sic on hold (MoH) of your telecommunications
system for 5 seconds.
- Wait until the music finishes.
- Enter the box PIN of the switch box as DTMF
characters with a DTMF transmitter or DTMF
telephone within 15 seconds otherwise the
telecommunications system will disconnect the
call. If you enter the correct box PIN you will
hear the internal music on hold for another 5
seconds.
- Wait until the music finishes.
- You have prepared for remote control with the
switch box. Now enter the
*
procedure of the
desired function from an internal telephone of
your telecommunications system.
* N A C
q ª
Night service
Selection:
Night service on/off
For single MSN
For All MSNs of your
telecommunications system
Replace
handset
Acknowledge-
ment tone
Enter desired
MSN
A
E
Off
On
M
A
z
#
Selection
*
-
Enter
procedure
of the
desired
function.
Example:
Night
service
Notes ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The entered function becomes active with the
acknowledgement tone at the end of the
procedure. You can enter the next
*
procedure if
necessary. You break your connection to the switch
box by replacing the handset.
The telecommunication breaks the connection
every time the wrong box PIN is entered. After
three wrong attempts, the switch box is locked for
30 minutes.
A
ll MSNs
Summary of Contents for AC 14 analog
Page 1: ...AC 14 communication with Operating Manual ISDN PBX a system...
Page 2: ...I 2 Introduction...
Page 12: ...S 6 Set up...
Page 67: ...K 5 Key words K...
