AGFEO AC 14 analog, Operating Manual

Page: 39 / 68

P - 1 Programming
P
Programming the telecommunications system
Your telecommunications system is set after instal-
lation so that you can telephone immediately and
use the functions of the telecommunications sys-
tem immediately.
The programming of the telecommunications sys-
tem is very flexible so that you can set it up to meet
Minimum PC requirements ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
- IBM or compatible PC with 80386 PC or higher
(recommended: Pentium)
- CD ROM drive
- Hard disk
- VGA card
- Black and white monitor
- Windows 3.1, Window 95, Windows 98, Win-
dows NT
Installing TK-Soft ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
- Insert the CD in your CD ROM drive.
The Installation Software starts automatically.
- Select out of the CD menu "AGFEO TK-Soft for
AS ISDN systems".
- Click the field "to install".
- When prompted to do so, enter the path and
confirm it. All files required are now automati-
cally copied from the diskette to your hard disk.
If the automatic-start function is deactivated on
your system, please do as follow:
1. Select /doubleclick) the symbol "My Computer"
on your desktop.
2. Open the symbol for your CD ROM drive
3. Start the Programm Setup(.exe).
Continue as described in "Select out of the CD
menu ...".
Connecting the PC to the telecommunications system ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
- Connect the PC/printer interface (D-SUB-9
socket) of the telecommunications system to the
PC’s COM port.
- Use a one-to-one V.24 connecting cable plug –
socket for the connection. It should not be
longer than 3 m.
- Start the configuration program.
- Configure the telecommunications system. Your
entries are accepted interactively with user guid-
ance.
- Disconnect the cable from the telecommunica-
tions system on completing the configuration.
Telephone system
(9-pin plug)
2
3
5
7
8
PC
(9-pin socket)
2
3
5
7
8
Telephone system
(9-pin plug)
2
3
5
7
8
PC
(25-pin socket)
2
3
4
5
7
Connection assignment of the PC cable
Programming the telecommunications system with a PC
your own personal requirements.
You have the following possibilities for program-
ming your telecommunications system:
- Programming with a PC
- Remote configuration by the dealer
- Programming with a telephone
You can program your telecommunications system
from a PC/laptop via the PC/printer interface with-
out knowledge of a programming language. Easily
comprehensible menus guide you through the con- figuration program. The “TK-Set” configuration
software is part of the TK-Soft software package
which can be found on the enclosed CD ROM.