S - 5
Set up
S
PC/printer interface ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢
The PC/printer interface of the telecommunications
system is a serial RS 232C interface. Here you can
connect:
- a PC, for configuring the telecommunications
system, for call data evaluation and computer-
aided telephony (CTI). The PC connecting cable is
contained in the scope of delivery.
or
- a serial printer for printing connection costs.
To connect a printer you need a cable which
complies with the connection assignment specified
below (max. length 3 m). The cable is available
from dealers.
Your printer must be set as follows:
- 9600 baud
- 8 bits
- 1 stop bit
- no parity
The printer must be kept switched on and
connected to the telecommunications system to
print the individual costs of the internal subscribers.
The telecommunications system stores 2000
connection data records (average) and the total
connection costs. Even in the event of a power
failure.
Telephone
system
(9-pin plug)
2
3
5
7
8
Printer
(25-pin plug)
2
3
5
6
7
8
20
Fig. 7: Connection assignment – printer cable
Summary of Contents for AC 14 analog
Page 1: ...AC 14 communication with Operating Manual ISDN PBX a system...
Page 2: ...I 2 Introduction...
Page 12: ...S 6 Set up...
Page 67: ...K 5 Key words K...
